Tips From Professional Pressure Washing Experts

How to Set Up Your Pressure Washer for Cleaning

If you’re looking for a way to clean your car, deck, or patio, a pressure washer is probably the best thing since sliced bread. It will blast dirt off of just about any surface. Pressure washers are also great for cleaning driveways and sidewalks because they can get into all those nooks and crannies where soap doesn’t usually reach. To ensure safety at all costs, here are some tips from professional pressure washing experts on how to set up your pressure washer for cleaning:

Make sure the water supply is turned on.

The first thing you need to do is make sure the water supply is turned on. If you’re using a hose, then it’s hard to turn off a hose! But if you have a garden hose or irrigation system connected to your house, make sure that it is connected properly and turned on at the source.

Set the trigger gun to a medium setting.

If you have never used this type of equipment before, it may be hard to determine which setting works best for your needs. When you are using the pressure washer for cleaning, you will need to set the trigger gun to a medium setting. The medium setting is usually the one that is used for cleaning and not power washing.

Use a test strip.

To test for dirt remaining on the surface, use a test strip. If you are using a detergent/soap solution that has been diluted as directed in this manual and there is still dirt left behind after applying it to your vehicle’s exterior, increase the pressure setting until the test strip shows no residue. If you are using an undiluted detergent/soap solution, decrease the pressure setting until some residue appears on your car or truck

For your pressure washing and cleaning needs here in Greer, SC, you may turn to Sanchez Pressure Washing for professional pressure washing services. Call us at (864) 386-1357 today!

Review Us